E6010 Welding Rod for Mild Steel (ISO E 43 10 A)
6010 Welding rod is mainly used for backing welding of substrate, root passes, filler and cosmetic welding of mild steel pipes. It could be fashioned by one-side welding with back formation. And good condition of packaging and storage for E6010 welding rod is very important. Normally it does not need to re-dry. When it is damped seriously re-bake it at the temperature of 70℃ – 80℃ for 0.5 – 1 hour before welding. To increase the performance of welding, when using 5.00mm diameter one, bigger thrust and smaller current are recommended.
Type of Covering: High, Cellulose, Sodium
Welding Position: F, H, HF, OH, V, VD
Type of Current: DCEP
- Good condition of packaging and storage for it is important.
- Normally it does not need to re-dry. When it is damped seriously re-bake it at the temperature of 70℃-80℃ for 0.5-1 hour before welding.
- To increase performance of welding, when using dia. 5.0mm one, bigger thrust and smaller current are recommended.
Chemical Composition of Deposited Metal (%)
Mechanical Properties of Deposited Metal (AW)
|Tensile Strength Rm (MPa)||Yield Strength ReL (MPa)||Elongation A4 (%)||-30℃ Impact Energy KV2(J)|
Sizes & Recommended Current (DC or AC)
|Welding Rod Size (mm)||2.5 x 300||3.2 x 350||4.0 x 350||5.0 x 350|
|Current (A)||F, H: 60-90|
OH, VD: 50-80
|F, H: 70-110|
OH, VD: 60-100
|F, H: 110-150|
OH, VD: 100-140
|F, H: 150-200|
OH, VD: 140-180